Constructing a shallow foundation for beginners

Things you need to consider in making a true home foundation with a shallow foundation are as the following tips that we’d like to share with you. Meanwhile, check out the Pasadena TX foundation repair if you need to fix your foundation.

1. Determine the size and the floor plan that you will build.

This is the first step that becomes the basic benchmark in making a home. Also, draw a basic sketch showing your home building from the top to make it easier in making the house later.

2. Make a low plank

 It aims to benchmark in the work of the foundation. Determining the midpoint of the column as well as the position of the wall and from this bow plank, we can also make the wall of the elbow with a 90-degree angle.

3. Digging Foundation

The depth required to create a simple house foundation of approximately 40 to 50 cm.
This depth is also influenced by the texture of the soil in the area you want to build it.

If the soil has a hard texture then the size mentioned earlier is sufficient, if the soil structure is otherwise crumb / soft? then the excavation should be deeper and added with the cone along its foundation line.

4. Install the foundation

After you finish digging the hole. now it’s time you installed the selected type of foundation.

– Next the installation of bricks for the foundation in accordance with the bowpank point that had been made. Generally has a depth size of up to 4 layers of red brick.

– Bricklaying techniques must be done carefully. The foundation is triangular with the bottom layer widened, while the top one pairs of bricks that have a size of about 20 cm.

– When finished, then we proceed with installing iron that has been woven with binding wire. Each of the iron ends is bent or crooked and they are all associated with the iron foundation of the local plate or which may be called column pole.

– Furthermore, if installing the formwork for sloof using a type of board size of approximately 400 cm x 20 cm x 2 cm. This installation should be done neatly and strongly this is intended to avoid damage or broken when the casting process.