How to Handle a Cracked Column

Problems surrounding the house is endless. In certain parts, it can cause damage from temporary to permanent damage. We do not know how bad the damage is until we will need experts from free foundation repair estimate in Lewisville TX because their power has been highly tested and licensed. Other problems of the house not only on the walls and floors but also on the cracks in the columns can be categorized into three types, the damage that is not harmful, moderate and dangerous if not handled immediately. What causes a cracked column? Cracks with diagonal/oblique patterns on columns are usually called sliding fractures, which are caused by force in the horizontal/flat direction. Sliding rift like this is quite dangerous if not immediately handled because it can cause the column collapsed and unable to support the building.

Cracked with a horizontal/flat pattern is usually called a flexible crack, caused by excessive pressure on the column. As with sliding fractures, flexible cracks need to be handled carefully. Concrete blankets on peeling columns can be caused by low quality/quality of concrete used so that the strength of concrete against the pressure is reduced and the concrete blanket is easily broken. Control of the stages of development is necessary to prevent the decline in the quality of concrete. Damage to the column where the main iron reinforcement appears bent. In the visible column slightly bent. This is due to the lack of quantity and or lack of binder size (stirring). When the age of the building is still young, hair cracks can be detected. Although the hair crack is not harmful, but quite disturbing scenery. These small cracks are mostly caused by environmental influences, ie drastic changes in hot and cold temperatures. For example, a house built in the summer, after exposure to continuous exposure to rain.

For diagonal cracks and horizontal cracks, it is necessary to check the strength of the columns if the columns are still strong enough to be grouting with epoxy fluid in the press area. If after the analysis of the column is less strong, it is necessary widening the size of the column. This widening is done to strengthen the column so as to hold the load on it. For small cracks, simply add the stucco so that the iron reinforcement is not related to the outside air which can cause rust.